Coaxial speakers of the White series are designed for entry-level audio systems.
The series is represented by models of popular form factors WLS-502 130 mm (5.25″) 50 W RMS - two-way, WLS-603 165 mm (6.5″) 60 W RMS and WLS-693 150x230 mm (6x9″) 70 W RMS - three-way.
The speakers are designed for installation in regular places of cars and do not cause difficulties during their installation. Quite high sensitivity implies operation from amplifiers of head units, while they have a wide frequency range of reproduction.
Steel stamped baskets are well damped and have standard sizes. Polypropylene diffusers are rigid, lightweight, durable. Upper suspensions are made of butyl rubber.
The high-frequency section is represented by tweeters made of PET (Polyethylene terephthalate), moisture-resistant and can be safely placed in doors.
The acoustic systems are equipped with protective grilles and accessories for installation and connection (acoustic wires, screws, brackets).
WLS-6MW midbass speakers 165 mm (6.5″) of the White line with a nominal power of 60 W (25 mm coil), impedance of 4 Ohm and a fairly high reference sensitivity of 90 dB, have a wide frequency range of 42 Hz - 7 kHz. Designed to work from head unit amplifiers or not very powerful external amplifiers, including standard car systems. Calculated acoustic design - FE, i.e. work on the door volume.
A distinctive feature of the WLS-6MW is a deep, rich midbass, with bright midrange frequencies.
For installation, the speakers are equipped with screws and brackets.
The White series model range is represented by the WLS-13TW and WLS-20TW tweeters.
WLS-13TW by 54 mm flange, PET (Polyethylene terephthalate) dome measuring 13 mm. Power 20 W RMS. Sensitivity 90 dB, thanks to a lightweight movable system and a neodymium magnet. The mounting depth is 20 mm, which facilitates trouble-free installation in standard places of many cars. For other installations, mounting cases are provided in the kit. The tweeter frequency range is 4 kHz - 20 kHz. The tweeter can be perfectly combined with the WLS-6MW midbass speaker both with channel-by-channel band switching and in the version with passive division.
WLS-20TW by 54 mm flange, PET (Polyethylene terephthalate) dome measuring 20 mm. RMS power 25 W. Sensitivity 91 dB, thanks to a lightweight movable system and a neodymium magnet. Mounting depth 20 mm, which facilitates trouble-free installation in regular places of many cars. For other installation, the kit includes mounting housings. The tweeter frequency range is 2 kHz - 20 kHz. Tweeters are equipped with high-pass filters - a cutoff of 4 kHz with an attenuation characteristic of 6 dB / oct. WLS-20TW can be perfectly combined with a midbass speaker WLS-6MW with passive band division, or with an active one, but without a complete crossover.
